How “Suicide Doors” Got Their Name
So why are these doors called suicide doors? Did someone commit suicide with one? What’s suicidal about a door?
The theory is that the forward motion of the car could cause the door to fly open, possibly causing the unlucky person sitting next to the door to be pulled out of the car, or the door itself could be ripped from its hinges. It’s debatable as to whether this was speculation or reality, but cars of this era did not have seat belts, so there was nothing to hold a passenger in the car.
Think about it. Imagine trying to open a conventional front door while you’re driving 70 mph. It’s going to be increasingly difficult because of a simple fact of physics: air pressure. The farther you open the door as you’re sailing down the highway, the more air is going to hit the door, forcing it back. Hopefully, the end result is that it never opens far enough for you to fall out.
Now, imagine accidentally unlatching a door that opens the other way. Instead of working to keep the door shut, the road wind serves as an accelerator, helping to fling the door open and maybe you with it as you grab for the handle in a panic to close it. To add insult to injury, you’ll likely be whopped by the door as you fall out. The term “suicide doors” was therefore placed on vehicles with the rear-hinged door configuration, the theory being that anyone inside was on a suicide mission because of the design.
Another urban legend about the origins of the suicide doors maintains that 1930s gangsters liked the door design because it made pushing someone out of a moving car easier. If that were true, though, wouldn’t the correct term be “homicide doors”?
Suicide doors were favored in pre-war automobiles throughout the the 1930s. They were fairly common on many domestic and imported car makes in the 1930s. A forward-opening door — either in front or back — permitted easier access and egress — especially for women in long skirts or dresses. Hinging the front door at the rear also facilitated a more slanted windshield.
As a result, manufacturers understandably have tried hard to bury the old “suicide doors” reference. Today, you’ll find such killer names as “RAD” or “rear-access door” (Saturn), “freestyle doors” (Mazda RX-8), “coach doors” (Rolls Royce), “FlexDoors” (Opel), “scissor doors” (Lambo), “clamshell” (Toyota), and “rear-hinged doors” (preferred technical term).
Now, About That Name…
So where did the name “suicide doors” come from, then? You’ll find multiple explanations, none definitive. The fact that no historian can verify the origins of this bit of slang only adds to the mystique.
Source: Wikipedia
Lewis Reed Photo on Discovery’s Science Channel
In case you missed it, I got word that Lewis Reed’s 1923 race car photographs were taken out of the U.S. version of Episode 4 ‘London Array’ Series of Impossible Engineering that was scheduled to be broadcast on Thursday, January 24th on Discovery’s Science Channel. The race car photographs were a part of the “London Array Wind Farm” episode that featured a segment on the development of the race car.
According to TwoFour Broadcasting, this has been happening with this series as Discovery requires a shorter episode length than the rest of their broadcasters. However, one of Lewis Reed’s photos made it in the UK version, and the rest of the world. TwoFour was kind enough to send me a DVD copy of the UK version of the London Array episode that shows the archive featured in the show. Below are screen shots taken directly from the DVD.

Lewis Reed’s photo from the 1923 Rockville Fair Auto Races extracted from the Science Channel Impossible Engineering DVD.
Impossible Engineering celebrates engineering wonders detailing how they were built and how they work. The show unveils the past, present and future builds that have and will continue to change our world.
“Impossible Engineering” is produced for Science Channel by Twofour Broadcast.
Then & Now: Windsor Store in Darnestown
Photos are our window to the past. You might not realize how much Darnestown has changed until you look back and see what it looked like in the past. In this “Then & Now” feature, I have combined one of Lewis Reed’s original photograph’s for “then” and matched it with a google street view image for “now”. Travel back 110 years in time to see how Windsor Store in Darnestown used to be.
A bit of Darnestown history: The Darnestown area, which was located at the intersection of Darnestown and Seneca Roads, was settled in the 1750s. Darnestown Road (Route 28) was an old Indian trail and is recognized as one of the oldest roads in Montgomery County, Maryland. By the 1820’s, the town began to blossom and hosted a wheelwright, the Grist Mill, a blacksmith, a physician, a post office and a variety of other businesses. Darnestown became an important place for commerce in the area. Seneca Road led to a sandstone mill and the C&O canal at Seneca Village. From Darnestown one could travel either by stagecoach along Darnestown Road or board a packet boat on the canal at Seneca.
THEN: Mr James Windsor, grandfather of Curry England, opened the Windsor Store at the corner of Seneca and Darnestown Roads in approximately 1878. He operated the store for many years, and also served as Darnestown’s Postmaster for some 20 years. During the 1800s mail arrived three times a week by stagecoach from Rockville and local people gathered for the arrival, creating a regular social event. The Darnestown Post Office was discontinued in 1911. The Windsor building survived until 1969, when it caught fire and burned to the ground.
NOW: Today, a 6-Twelve Convenient Mart sits on the site.
Then & Now: Liberty Milling Company, Germantown
The coming of the Industrial Age meant the end of the Romantic Era and the beginning of machine’s rule over nature. In Germantown, this was represented by the big steam-powered mill. For this post, I have used two of Lewis Reed’s original photographs for “then” and a stock image from today for “now”.
Liberty Milling Company (THEN): “Feed the Liberty Way” was the slogan of Liberty Milling Company, mainstay of the little farming community of Germantown, Maryland for many years. The original mill was steam-powered and began operation in 1888. It was founded by the Bowman brothers – Charles, Eldridge and Upton – of Cedar Grove. Lumber to build the mill was sawed at the Black Rock Mill, one of the oldest water-powered mills in Germantown. The Bowman Brothers did a brisk business milling wheat and corn and selling it in the area as well as shipping it to the Washington, D.C. markets by way of the railroad. In about 1914 fire engulfed the old wood structure and the entire mill was lost. The Bowman brothers rebuilt almost at once. The new mill was sold by the Bowman brothers to the Liberty Milling Company.
In 1935 the company purchased an adjacent lot to the south and built a warehouse and store to sell its many products, which, according to a 1963 Damascus Courier article included Gold Leaf Flour, Silver Leaf Flour, Liberty Cake Flour, Liberty self-rising Corn Meal, Liberty Straight-Line Winter Wheat Flour, Liberty Pancake Flour, Liberty Self-rising Buckwheat Flour, Dairy Feeds, Horse Feeds, and Chicken Feeds. These products were sold all across the nation.
By the 1950s, it was the second largest mill in Maryland with eight 50-foot silos and a capacity of 24,00 pounds of flour a day and 9,000 pounds of cornmeal a week, bringing in a profit of more than $1 million a year. During World War II, it produced flour for the armed forces.
Liberty Milling Company (NOW): The Liberty Milling Company was finally put out of business by the larger commercial mills, its income dwindling in the 1960s. The mill burned in June 1972, and the still-standing cement silos were removed by the county in 1986 to make way for a train commuter parking lot. A historic marker erected by the Germantown Citizens Association stands at the edge of the parking lot.
Source: Germantown Patch




















Recent Comments