Then & Now: Clarksburg Main Street, 1913
This post is a continuation of a series of “Then & Now” images from Lewis Reed’s Photo Collection alongside photographs of how they appear today. Lewis Reed worked hard to preserve a visual history of Montgomery County, Maryland and surrounding area long before automobiles were even around. As early as 1910, he toured on his motorcycle across the state of Maryland and took photographs of many historic locations. Taken approximately 109 years apart, these photos takes us back in time to Clarksburg, Maryland at the intersection of the main road between Georgetown and Frederick and an old Seneca trail. The corresponding color photo is a google maps screenshot from the same location more than a century later.
CLARKSBURG MAIN STREET (THEN): In the early 20th century, Clarksburg was the third largest town in Montgomery County, after Rockville and Poolesville. Clarksburg had four general stores, two hotels, and an academy of learning. It also had a blacksmith, a doctor’s office, tanneries, shoemakers, winemakers, tailors, wheelwrights, fertilizer businesses, skilled farmers, master carpenters, and two town bands.
The black and white image was taken by Lewis Reed in 1913, where Clarksburg Road (to Boyds) met Frederick Road (Rt 355). Frederick Road has also been known as The Georgetown Road and the Great Road. The town of Clarksburg was laid out along Frederick Road. The road was used as the stagecoach line from Frederick to Georgetown and it remains as the present main street through Clarksburg. Turning wagon ruts/tire tracks are visible in the lower left corner. The first house on the right was the Horace Willson House (still standing). Left of the Willson house was Willson’s Store, built on the site of the town’s first trading post, established by town founder John Clark (still standing). Established April 1, 1800, this was the location of the first post office in Clarksburg, the second oldest in Montgomery County. In 1842, the old trading post building was replaced with a two-story general store. The dwelling beyond the pole served as a church parsonage (still standing) and just beyond stands the Clarksburg United Methodist Church. The church was used for church dinners, 4-H meetings, and community gatherings. The vehicle appears to be a very early Ford Model T.
Clarksburg Main Street (Frederick Road Rt 355). Photo by Lewis Reed, 1913.
CLARKSBURG MAIN STREET (NOW): Over 109 years have passed and three buildings in Lewis Reed’s photo still remain. The structure on the right in the current day photo below was the Lewis General Store and the yellow vacant house a little further down the road was the church parsonage. The recently renovated Lewis General Store received an award for best restoration of a historic commercial property from the county. The charming building boasts a tin ceiling, original counters; original beams from 1750 are exposed in some areas, wood floors, and many historic details throughout. The steps to the ME Church South are still visible today on Rt 335 near where it intersects with Spire Street (about where the car is in the image). The congregation claims to be the “oldest continuous Methodist congregation in Montgomery County”. Today, Clarksburg remains a small rural town, retaining many of its 19th century structures. It is among Montgomery County’s earliest, most intact historic towns.
Due to the Clarksburg Square Road extension that now connects to Frederick Road, the Horace Willson House was relocated approximately 70 feet to the south to preserve it. The building is currently a wine and beer shop.
This current day image is a google maps screenshot from the corner of Redgrave Place and Rt 355.
Sources of Information:
Joan Edwards Ruff, Resident of Clarksburg for 45 years and granddaughter of Lillian and Elwood Barr
“The History of Clarksburg, King’s Valley, Purdum, Browningsville and Lewisdale Maryland” by Dona L. Cuttler
MHT Inventory Form13-10 Clarksburg Historic District
The First Plymouth Automobile Debuted on This Date 94 Years Ago
Plymouths were sold at Reed Brothers from 1930-1969. Pictured is an original 1940s Reed Brothers Dodge-Plymouth three-pocket shop coat made by Anderson Bros. of Danville, VA.
The first Plymouth automobile was introduced on July 7, 1928. Plymouth was Chrysler Corporation’s first entry in the low-priced field, which at the time was already dominated by Chevrolet and Ford. Plymouths were actually priced slightly higher than their competition, but offered all standard features such as internal expanding hydraulic brakes that the competition did not provide. While the original purpose of the Plymouth was to serve a lower-end marketing niche, during the Great Depression of the 1930s, the marque helped significantly in ensuring the survival of the Chrysler Corporation in a decade when many other car companies failed. Beginning in 1930, Plymouths were sold by all three Chrysler divisions (Chrysler, DeSoto, and Dodge).
Plymouth sales were a bright spot during this dismal automotive period, and by 1931 Plymouth rose to the number three spot among all cars. Plymouth almost surpassed Ford in 1940 and 1941 as the second most popular make of automobiles in the U.S.
In 1957, Virgil Exner’s new Forward Look design theme, produced cars with much more advanced styling than Chevrolet or Ford. 1957 total production soared to 726,009, about 200,000 more than 1956, and the largest output yet for Plymouth. However, the 1957–1958 Forward Look models suffered from poor materials, spotty build quality and inadequate corrosion protection; they were rust-prone and greatly damaged Chrysler’s reputation.
Most Plymouth models offered from the late 1970s onward, such as the Volaré, Acclaim, Laser, Neon, and Breeze, were badge-engineered versions of Chrysler, Dodge, or Mitsubishi models. By the 1990s, Plymouth had lost much of its identity, as its models continued to overlap in features and prices with Dodges. Plymouth’s product offerings and buyer appeal, and sales continued to fall.
This Limited Edition 1999 Plymouth Prowler convertible was a vehicle from the dealership owners’ private collection. Photo by blog author.
By the late 1990s, only four vehicles were sold under the Plymouth name: the Voyager/Grand Voyager minivans, the Breeze mid-size sedan, the Neon compact car, and the Prowler sports car, which was to be the last model unique to Plymouth. The Prowler came about as part of Chrysler’s efforts (the last as it turned out) to differentiate Plymouth from the rest of its lineup in hopes of keeping the brand alive. It was hoped that it would be received well enough to garner some attention, some of which might spill over into some of their other models.
Plymouth rarely exceeded 200,000 cars per year after 1990. Consequently, DaimlerChrysler decided to drop the make after a limited run of 2001 models. This was announced on November 3, 1999.
The 100th Anniversary of the Founding of the Montgomery County Police Department
Here posing in front of Reed Brothers Dodge on July 4, 1922 is the first known photograph of the entire MCPD. Pictured left to right: Earl Burdine, Lawrence Clagett, Guy Jones, Chief Charles Cooley, Leroy Rodgers, and Oscar Gaither. Photo taken by Lewis Reed on July 4, 1922.
July 4th marks the 100th anniversary of the beginning of the Montgomery County Police Department. Cattle rustling, bootlegging and stealing poultry were among the most common crimes when Montgomery County hired its first police chief and five officers in July 1922. So widespread was the theft of chickens and turkeys that some residents employed a homespun form of crime prevention by cutting off a specific claw on their birds to identify them. “Officers knew who all the chicken thieves were,” said one historical account of the era put together by the police department, “and upon getting a report of missing Rhode Island Reds, or some other breed, would head straight for the thieves’ hideaway to try to catch them ‘red handed’ before the birds got to the frying pan.”
Posing in front of Reed Brothers Dodge on July 4, 1922 Chief Charles Cooley, center, and his men of the first mounted unit of the Montgomery County Police Force, were on their first day of duty. For several years, since there was no police station, the officers would meet for “roll call” on the steps of the Red Brick Courthouse in Rockville at 2:00 p.m. every day to let each other know they were alive and well. Chief Cooley was given the privilege of a Model T Ford. The chief was paid $1,800 a year (the chief now gets $112,564) while the officers got $1,500. Each of the officers was issued a Harley-Davidson motorcycle, a .38 Smith & Wesson handgun, a black jack, law book and was allotted $300.00 a year for the upkeep of their motorcycle. Jones patrolled Silver Spring, Rodgers the Bethesda-Chevy Chase area and Burdine, Clagett and Gaither the Upper County areas.
The county’s population in the early 1920s was just 35,000 (it’s now more than 800,000). Much of the county was farmland, which accounted for the thefts of livestock. It also was the Prohibition era, when bootlegging and moonshine still factored routinely on an officer’s shift.
The officers worked 14 hours at night, 10 hours in the day, with two days off every two weeks. But they were on call at all times. Since there was no mobile radio contact (the first one-way radio system was installed in cars in the early 1930s), the officers tended to hang around the courthouse or a local firehouse that had a phone.
One of the officers came up with the idea of placing a flashing red beacon light on a pole atop the Rockville courthouse. When flashing, it would alert police that they had a call or were wanted at the office. In 1927, similar lights were used at district stations in Silver Spring and Bethesda.
As part of the 100th anniversary celebration, there will be a Commemorative Ceremony at the Red Brick Court House on July 7, 2022 from 10am-12pm that will mirror the swearing in that took place 100 years ago. The Chief will reveal the contents of the time capsule that was buried 25 years ago, as well as reveal the contents of what will be placed in the new time capsule. This event is free of charge to attend. For more info and other scheduled events, click here: https://www.mcpd100.org/live-events
Congratulations MCPD and thank you for your many years of service!
Dodge “Punishment Pit” – Torture Makes Them SAFER!
Did you know that Dodge Brothers corporation had a “punishment pit”? This pit was a new type of automobile proving ground that was regarded as the quickest and most satisfactory way of finding out how an automobile can stand up under treatment of the most severely abnormal sort. Before Dodge introduced its latest models, some of the test cars were tortured in the punishment pit for as long as 600 hours.
Montgomery County Sentinel. August 24, 1933
In these trials, every stunt resulting in mechanical agony to all parts was employed to furnish the engineers and builders with proof of the car’s sturdiness and safety, with its ability to “take it.” Where the owner-driver would steer around chuck holes, dams and other obstacles, the punishment pit driver hunts the obstacles, steps on the throttle and tears right into them. He is exceedingly nimble-footed and can let the car turn over without being injured himself.
Photo of Plymouth against which a truck overturned; note how steel body resisted impact
Not only in the pit is torture applied to the new models. An ingenious device called the “Belgium roll” is almost as cruel to an automobile as the punishment pit. This machine shakes, rattles and vibrates a car placed upon it in such a vigorous manner that many hidden defects are revealed speedily. A few hours of the Belgium roll subject an automobile to more punishment than months of driving over the roughest roads. The effects of vibration on every part are studied closely by the engineer, changes made here and there, and to the public goes the result of torture —
A quiet, safe, smoothly riding automobile that will give years of service.
Big Dodge Six in the torture pit
One unusual test of motor quietness was conducted by Dodge engineers under military supervision. While the engine was running, an expert rifleman sitting in the front seat fired ten shots with a United States army rifle at a regulation target 100 yards away. During aiming and firing, the rifle rested on the windshield. The result was a 100×100 target score.
Target shows where bullets struck
Unusual as these tests may appear, they are the means to a common end, that of producing faster, safer and more comfortable automobiles.
Source: Popular Mechanics · Vol. 60, No. 6 · Dec 1933
Some of the Earliest Occupations in Montgomery County
Do you know what a Qwylwryghte, a Stock Maker, or a Hackneyman does? These are some of the old occupations, of which many are archaic, that may show up on old documents relating to our ancestors. Some of the occupations do not exist today or are called other names. Below you can find representations of many varied occupations that Montgomery County residents engaged in during the early 20th Century, though the list is not at all comprehensive.
Blacksmith/Wheelwright/Cabinet Maker
A qwylwryghte — don’t ask me to pronounce it! — is one who makes wheels, or works with wood.
Philip Reed (1845-1918) outside his blacksmith shop in Darnestown, ca. 1901
Formerly located on Darnestown Road near the intersection of Seneca Road, Philip Reed operated a blacksmith, wheelwright, and cabinet making business next to his home. These occupations overlapped due to the similar skills they required: the same metal-working tools that were used for horseshoeing could be used to make wheel-rims and other metal wagon parts; the same woodworking skills that created wagons could be used to make pieces of furniture for the home. As late as 1910, there were still approximately 60 blacksmith shops in the county.
Stock Maker
Philip Reed (1845-1918), Maker of Gunstocks for Sportsmen
From the June 13, 1940 edition of The Montgomery County Sentinel:
We also read that Philip Reed built up great fame for the town as a maker of gun stocks for sportsmen – he was the father of the Reed Brothers, our local auto dealers. Edgar Reed tells us his grandfather was a cabinet maker and wood carver, but that the wood working talent no longer seems to run in the family.
A Stock Maker carves gun stocks from wood (usually walnut) and fits them to the metal parts of the gun (receiver and barrel). Very high grade firearms may have stocks fashioned from very costly blanks, mostly of one of the walnut varieties, specially chosen for its rare and highly figured grain. The fashioning of high end gun stocks calls for an extremely high level of skill and craftsmanship.
Liveryman
The meaning of Hackneyman is a man who hires out horses and carriages.
An unidentified livery stable in Montgomery County.
Closely related to the blacksmithing and wheelwrighting industry, the livery-stable keeper provided horses that were used in everyday tasks and transportation. The liveryman boarded horses for rent and also provided carriages and wagons. Compared to our modern world, the blacksmith-wheelwright correlates to the auto repair shop, and the livery to the car rental business.
School Teacher
Ethelene Reed
At the turn of the century, teaching was one of the only respectable fields open to educated women who wanted to work. Many unmarried women worked as teachers during the 1900s, and in the early days, they were often required to leave the profession once they were married. The 1920 census indicates that Lewis Reed’s wife, Ethelene (pictured above), was a teacher in the Maryland public school system until her daughter Mary Jane was born in 1922.
Ice Cutter
Men harvesting ice with pitchforks and hand saws on a pond in Darnestown, 1910. Note the blocks of ice stacked up along the shoreline.
Most people wouldn’t consider the months of January and February a season of harvest in Darnestown, Maryland. But in our not so distant past, this was harvest time for—ICE. Rivers, lakes and ponds are generally frozen and ice was harvested like a winter crop to keep food cold all summer long. Before modern refrigeration, ice for refrigeration was obtained organically through a process called “ice harvesting.” Ice cutters would risk their lives going out with saws, tongs, and pitchforks to methodically cut and drag blocks of ice from a nearby frozen pond. Those blocks would then be stored in hay-packed ice houses, later distributed throughout towns and cities during the heat of summer. However, people did not put ice in their drinks as we do now. The possibility of debris having been in the water as it froze – even a bug now and then – discouraged the idea.
Store Clerk/Cashier
Clerks at J. F. Collins General Store on East Montgomery Avenue in Rockville, 1914. At left is A. F. “Seen” Beane, who bought this store from Collins in the 1920s and continued doing business in downtown Rockville until his retirement in the 1960s.
The cash register was invented in the late 1800s, and by the 1900s almost every retail organization had one. Store owners sometimes conducted business with their customers, but the more lucrative establishments would hire one or more clerks as assistants to interact with the public. By 1915, more than half of all clerical workers tended to be young women.
Chauffeur-Mechanics
Chauffeur Lewis Reed is tending to the motor, 1910
Chauffeur-mechanics of the early 1900s were the first group to earn a living working on automobiles. At the dawn of the early 20th century, society was transitioning from horse-drawn carriages to automobiles. Having grown up in a blacksmith family, Lewis Reed was well positioned to move to the new technology. The 1910 census indicated that 23-year-old Lewis Reed was working as a machinist. Lewis Reed worked as a chauffeur from roughly 1910-1914, before he became involved in the business of selling and repairing automobiles.
Motorman and Conductors
Motorman and conductor on a Georgetown trolley car, ca. 1908
The debut of Rockville’s trolley cars in 1900 marked the beginning of a golden age of local mass transit. Each car had a two-man crew (a conductor and a motorman) one to operate the car and the other to collect fares.
Mill Worker
Two workers pose inside an unknown mill.
A mill is a building equipped with machinery that processes a raw material such as grain, wood, or fiber into a product such as flour, lumber, or fabric. In the 18th and 19th centuries, mills were powered by water in creeks or rivers. In a flour mill, water flowing over the mill wheel was converted by gears into the power to turn one of two burr stones. Kernels of wheat were then ground between the two stones. The grinding removed bran (the outer husk) from the wheat kernel, and then crushed the inner kernel into flour.* Flour mills were an important part of rural communities across the country, including Montgomery County, and millers were respected members of their community.
Farmer
An agricultural tractor powered by a steam engine, a design used extensively in the late 19th and early 20th centuries.
Thomas Kelley’s Pumpkin Field, early 1920
Above is a photograph of three men in suits pumpkin picking in Thomas Kelley’s field of pumpkins in Pleasant Hills, circa 1920. Tom Kelly farmed much of the land around the Pleasant Hills homestead and was famous for his “Kelly Corn” farm wagon of fresh dairy produce during the summer months, as well as the corn that fed visitors to the Montgomery County Fair each August and, of course, his pumpkin patch in the fall.The turn of the century was a time of transition, and the families who went from horses to tractor horsepower witnessed the birth of mechanization on the farm. The newest farm machinery to hit the market near the turn of the 20th century were traction engines powered by steam; essentially the predecessor to today’s modern farm tractor. They could plow, they could haul, and you could put a big belt on the fly wheel and drive a saw mill. The engines would normally run on coal, wood, or even straw: whatever would sustain a fire.
Francis Flack of Montrose on steam tractor with roof, 1909. Built by Geiser Manufacturing Company, makers of the Peerless line of steam tractors.
Steam helped improve the efficiency of most farm chores, including plowing, planting and harvesting. And steam-powered equipment also was used for other heavy duty tasks, including rock crushing and wood cutting, to aid in clearing the land. Francis A. Flack (1875-1961), a life-long resident of Montgomery County, was a successful farmer in the lower section of the county near Garrett Park. The work depicted below–sawing felled trees into usable lumber–took place on his farm in 1909. Flack is pictured in the lower left photo.
I remember that engine as though I had seen it only yesterday, for it was the first vehicle other than horse drawn that I had ever seen. It was intended to drive threshing machines and power sawmills and was simply a portable engine and a boiler mounted on wheels.
It was the steam traction engine that inspired Ford to design and manufacture automobiles. By the early 1930s, gasoline-powered farm equipment, evolved from the automobile industry, had mostly replaced steam powered machines.
Road Worker (Heavy Equipment Operator)
Building a road requires moving earth and rocks, leveling the roadbed and digging trenches for drainage ditches. These tasks fell to those who operated the large steam-powered excavating machines and steam shovels. Pictured above are rare, historical photographs that Lewis Reed took of the construction of Massachusetts Avenue in Washington, DC as it was being graded in 1912. (click on thumbnails to view gallery)
A steam shovel is a large steam-powered excavating machine designed for lifting and moving large amounts of heavy material such as rock and soil. Steam shovels played a major role in public works in the late 19th and early 20th centuries. When digging at a rock face, the operator simultaneously raises and extends the dipper stick to fill the bucket with material. When the bucket is full, the shovel is rotated to load the railway car. Steam shovels usually had a three-man crew: engineer, fireman and ground man.
Census Taker
Two-story building that housed Hollerith’s card manufacturing plant, assembly plant, repair shop, and development laboratory, as it appeared in 1911.
Books
Related Resources
Copyright Notice
Reed Brothers Dodge History (1915-2012) by Jeanne Gartner is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
Reed Brothers Dodge History 1915 – 2012 
Recent Comments